Virgil Aurand

I've been very happy with the mill and have made several beams and timbers for my projects. I'm building a timber frame tiny house/cabin and the mill is vital to producing the exact lumber I need. Here is the New chicken coop I built with timbers cut from my Woodland Mill. The corner posts, girts, rafters, flooring, roost and nesting boxes were all milled by me. (siding/roofing are cedar fence slats I had on-hand)

John McGee

Dear Woodland Crew, Here are some pics, of my HM122 and trailer. We built the trailer, which makes the mill really ridged and it's a great way of keeping busy in retirement. I'm the one in the hat and the other guy is a great welder!

Stephen Meunier

I absolutely love my sawmill. I have been working on a project for our cottage and milled pretty much all the lumber for it. I set it up a bit higher as most of the work is done at knee level for that exact reason, to be easier on the back. I have a small electric crane/winch to lift the really heavy logs up onto the mill. I am making board and batten for the cottage and also lumber for a lean to against our garage. I will send pics when I am done. I milled up some black ash and made some charcuterie boards this weekend. I got a taste of changing out my first blade as well this weekend. Unbeknownst to me there were a couple of nails in the tree and the tree had grown over top of them. It didn't destroy the blade but it dulled it pretty good. I put the new blade on and did some trial and error with the adjustment bolt on the left fly wheel until the blade stopped tracking and rubbing on the blade guides and turned freely. Re torqued the blade and I was off to the races. Here are a few pic of the boards sanded and finished

Chad Pawson

It's a whole family affair, everybody loves it. It's not quite in its permanent location but we all cut the first log right in the garage!

Michael Reynolds

This is my friend working the mill and we built a frame for it Michael Reynolds I love your mill!

Tim Gow

Id like to thank you folks for a very well made product . Set up took about half of a day and it cuts very well . Thanks again im very happy with the mill

Kent Ryan

Here's some 1x17 sinker cypress from the bayous

Logan Blakney

So far I am really enjoying my woodland mills sawmill and the customer service from you and your team has been excellent. I have used it to resaw some oak beams in Alberta and have since transported it to our cabin in the BC interior to mill some lumber.

Thom Reutter

Ordered my mill on a Wednesday night and it arrived Tuesday afternoon. Got it all set up by the following Saturday and loved it . First log I got 12 2x4s. And 3 1x9s

Jim Davis

I would rate both of them as 5 stars. Thanks for putting out great products.