Mike Marsh

Thanks, great mill.

Ben & Judi Loberg

As a long time craftsman and home builder, I purchased my mill a few months ago with projects such these in mind. (Attached photos cedar table and termite damaged black walnut bench) I was able to take trees from our farm that had fallen years ago, and turn them into beautiful pieces that we use on a daily basis. Thank you for creating a sawmill that is easy to use and affordable!!!!!

Oggi Giovanni & Giovanni Hanno

Oggi Giovanni & Giovanni Hanno superato ogni limite della milly ed hanno segato un cedro gigante ed un vecchio castagno da 1,20 m di diametro. Bravi ragazzi Today John & John have exceeded every limit of the Milly and have sawn a giant cedar and an old chestnut 1,20 m in diameter. Good guys!

Anthony Walker

Mounted my mill a little off the ground, helps my lifting 12 ft. red oak in the front a little cedar, in the back and black walnut on top and this isn't even a third of what i have cut, this is habit forming and enjoyable. I am very proud of my family i am a grandfather of 4 at age 48 and will have one more grand baby in February i think my son said, let's hope that we can cut enough lumber for them all to enjoy Thanks for the friendly service.

Jean-Claude Bourgoin

I ordered my mill on Aug 19 and it was delivered in Edmundston N-B on Aug 22. It took me a full day to assemble. Without experience I was able to saw 1000 board foot of pine from two trees that were cut on my woodlot the previous winter without any issues. Attached are some pictures. I'm in the process of building a shed over the mill. I've included a couple of pictures. All the lumber for the shed was sawn with the mill. The I joist used on my shed is made by "Boise Alljoist" here in Edmundston. It is 20 inches deep x 24 ft span. It is made with 2x4 top and bottom with 1/2" OSB for the web.

Evan Yesberger

Out of the crate and ready to start assembling! SO excited!!

Brandon Daignault

This mill is great, we're able to run it all day milling ash and whatever else comes our way. Easy to set up and easy to cut. Just all around a great tool. Brandon. Red River Designs Canada is an Urban Sustainable Lumber Mill and Furniture Shop. All of our wood is locally salvaged from the GTA, promoting sustainability throughout our process. Our custom pieces are built with the utmost care, precision and quality. With a wide range of Canadian Hardwood species to choose from. Check us out at Red River Designs. https://www.facebook.com/search/top/?q=red%20river%20designs

Steve Franklin

I've been running the mill all summer and it's been a blast.

Jason Steele

Love it! Some nice birch for 59 truck bed sawed on HM130. Slowly geting it down to size sure is beautifull white oak gota love milling! My sawhouse is coming along.

Art Mitchell

I am set up to cut logs 29 feet long but am planning on working out a way to cut 32 feet. I will be taking progressive pictures as the log cabin takes shape. Without the mill, I could not build the cabin in the way I have planned. It will be about 30 by 28 and two stories high. I have cut about 1000 board feet of lumber that is stacked and seasoning. Love the mill!