David C

Verified Customer
Aug 30, 2019

WC68

I purchased the WC68 chipper in July 2018. After a year's use. I have to say I'm pretty impressed. The chipper handles good sized pine, oak, maple, and ash branches and barely breaks a sweat turning them into chips. Build quality is excellent, and the unit seems pretty rugged. The steel pallet and cage that the unit arrived in was "over the top". I have found that when I chip sappy pine branches with long needles, the discharge chute sometimes clogs. I don't store the owners manual in the plastic tube on the unit, but I do keep a ratchet with a 24 mm socket and an aluminum trowel in there to speed up unclogging of the chute and the housing. I also keep a 16 mm combination wrench in there for adjusting the power feed opening, and two 13 mm wrenches for the shear bolt (haven't needed them yet!). My previous chipper had a manual feed, and it was exhausting to keep it fed. Love the power feed on this unit. It's like being on vacation. Twisty, branched tree limbs get drawn and crushed in with little effort from the operator. I sometimes chip gnarly mountain laurel, and the power feed pulls this in fine too. A couple nits/suggestions: The machined slot for adjusting the deflector on the top of the discharge chute should be a little longer toward the top to allow for a straight discharge for those of us who blow chips right into the woods. I spent a little time with a drill and a grinder to extend the slot, but it'd be nice if it came from the factory that way. The clevis pin for the safety bar actuator rod (which gets removed/installed frequently) is kind of a pain. I changed mine to a pin with holes on both ends with two spring clips, so that no matter which side of the chipper I approach the pin from, I have a clear view of the clip. Way easier. It'd be nice to have a way to add some pressure treated 2x4 feet to the bottom of the unit. Unfortunately, my unit lives outside year round, and keeping the legs off the ground would be desirable.. Some drill holes in the base and some angle iron clips would do the trick. But other than that, I really like the unit.

Charles D

Verified Customer
Aug 19, 2019

WC68

love it

Paul K

Verified Customer
Aug 15, 2019

WC68

I have used the WC68 on various limbing jobs with neighbors and relatives. It worked as expected and everybody was impressed. My real question was, "how would it do on shrub prunings". Well, it performed quite well after I learned how to feed this kind of debris The enclosed pictures are of very old Mock Orange, Spriea and Forsythia shrubs. Although I amd elderly and slow, it took only a couple hours to clean up the two piles. Cheers, Mike

Richard S

Verified Customer
Aug 15, 2019

WC68

I highly recommend this WM 68 wood chipper. Combined with my John Deere 301A, I have about 40 hp at the PTO. Nothing I feed it bogs it down one bit, this is a wood eating machine. Shipping and delivery was excellent. Excellent packing and easy set up. It's currently eating mulberry like it's nothing! Perfect, very useful chips!

Darrin J

Verified Customer
Aug 13, 2019

WC68

I just received my chipper yesterday. I was able to assemble it by myself in about an hour and a half .This morning I used it to chip some branches I had around. The wood chipper Worked great and seems to be a well-built machine.

Daniel N

Verified Customer
Aug 12, 2019

WC68

So far so good, The quality and performance on this machine is amazing. Im glad I go it!

Nicholas V

Verified Customer
Aug 10, 2019

WC68

This thing is bad a$$!

Ron S

Verified Customer
Aug 10, 2019

WC68

So far so good

Andrew W

Verified Customer
Aug 10, 2019

WC68

The WC68 has been a great addition to my property so far. Compared to my old self feed chipper, it’s on a completely different level. I am far more productive with a lot less effort. The 6” capacity is perfect for my needs and once you go hydraulic feed, you’ll never want to go back. I have only put maybe 20 hours on it now, but it appears to be built very well and have not had any trouble at this point. Thank you to Melissa at the Port Perry location for answering my questions and making the purchase very pleasant and easy. -Andrew W.

Tyler E

Verified Customer
Aug 10, 2019

WC68

Easy setup, very efficient at chewing through brush. Very happy with purchase

Showing 1-10 reviews of 243.

JOIN OUR NEWSLETTER!