Dean W

I purchased my WG24 stump grinder, so far I have cut 8 stumps all good with no problems, I love this unit

Paul T

Can't praise it enough. It was delivered on time easy to set up, (follow the instructions they are user friendly) Stump wise... over fifty so far. mostly pine, with diameters from 12" to 32". I've had to adjust the clutch springs once, no problem, having a problem of trying to grease (access the grease fittings in the drive shaft knuckles) other than that this is the best implements I've purchased for my Kubota. Its a well made, dependable, affordable, no non-sense stump grinder that is on a level far above any competition.... Semper fi.. PT

Gregg C

From purchase to operation everything was first class. First Woodland Mills contacted me after my order to make sure my tractor was compatible. Then shipping information was provided to keep me informed of its arrival. The shipping container is one of the best I have seen- rugged, protective, and yet it was easy to remove. Directions were easy to understand and after checking the PTO shafts length I installed it and started grinding stumps. It took a couple of passes to get the depth right but I was surprised how easily it ground the the stumps. I've ground a dozen so far without problems and look forward to using it again. There is one drawback however. You have to look back over your shoulder when grinding. My neck would get stiff and have to turn to the other side. The second time using the grinder I shifted more of my body and found it more comfortable. Overall I am very pleased with the purchase. Easy to use and with the quality of the product I'm sure I'll be able to use it for many years.

David T

Good Machine

George F

put it on a 26hp tractor, had to trim pto shaft,work great, good for large and small stumps, very well built and simple, goes down about 4 inches below the surface, work great and would recommend it.

David P

I have used my stump grinder 4 times and it breezed through all 4 stumps with no problems. The largest was a 22" cedar stump and it took around 15 minutes to cut down 6" below grade. I couldn't be happier with my new toy.

James M

Works great and tech support was very helpful in getting me started

Nathaniel L

I have ground up roughly 6 stumps. All with ease. Insanely high quality product. Very, very well built. I will not hesitate to purchase more Woodland Mills Products in the future.

Ken B

I received the stump grinder well packaged and undamaged with all the required parts. After setting the clutch for my tractor I used the grinder for about 2hrs the first day and another 4 to 6 hrs the next week. The grinder does an excellent job, I am running it with 48 PTO HP and am extremely pleased with the results. The trees in my area are mostly softwoods, pine, spruce and poplar. Thank you, Ken Barnett

Richard W

I have a Kubota BX2380 with 17 PTO HP which is less than recommended. Since I am retired and have time the stump grinder works fine. Just go a little bit slower. Never had the grinder tilt upward yet and I’m on my 20th stump.